ORDERING CERAMIC GRANITE WORK-TOPS
 
Sink Cut-outs
            
                           
  If you have a sink cutout we need to know what type of sink you are intending to use. There are 3 main types      
                           
  1. Sunken Sink         A sunken basin rests beneath the worksurface , it is important to remember the inside edge of the sink hole will need to be polished to match the rest of the worktop
               
2. Raised Basin             A raised basin normally covers the cut sink hole and therefore no extra finishing is required to the inside edge of the cut-out.
                 
                   
                       
3. Semi fitted Basin       Semi fitted basin also hides the cut edge and usually eliminates the need for extra finishing to the cutout.
             
               
                       
  !     Your sink provider will provide you with a template for the cut-out we need to make. For enquiry purposes do not worry about the exact basin size
                       
  !     Tap holes need to be drilled through the worktop. You need to tell us how many holes you will need. Dont worry too much about the exact size at this stage.