Why
Register ?
Some
areas of this site are restricted to the use of registered
specifiers. Registration is easy and allows users
to request free samples and download drawings and
files
Register now
|
|
|
 |
Sentinel
Primary Entrance Matting, complying with BS 7953 - 1999.
Sentinel Primary Entrance Matting is manufactured at our factory
and consists of high grade aluminium sections, standard 16mm high,
tensioned with PVC-coated stainless steel chords. Rubber backing
is fitted to both ensure absorption of noise and a softer feel for
pedestrian traffic.
The Sentinel Gap system collects wet and dry contamination which is deposited through
3 or 6mm wide gaps into the matwell or reservoir below the mat.
The matting can be rolled up and removed from the matwell for regular
cleaning. |
 |
|
|
Based
on the External Primary Entrance Matting aluminium profile, Sentinel
Zone 2 Matting utilises cut pile carpet strips containing monofilament
fibres which improve the cleaning and scouring properties of the
mat quite dramatically.

|
Primary
Matting
In locations where the contamination is excessive, Sentinel entrance
matting offers a multitude of options - moisture absorbent carpet
strips with monofilament fibres can be interspaced
with aluminium scraper bars or stiff brush tufts, rubber strips
and ribbed aluminium sections or any combination of these. Sentinel
entrance mats have been installed in many varied locations including airports and Netowrk Rail and London underground stations, prestigious hotels, leisure centres, shopping centres and major department stores such as Selfridges in London
If effective entrance matting, laid to adequate size, is not present,
floors become contaminated much more quickly. Residues of dirt
and grit deposited by footwear can cause damage to the inner floor
surfaces, if expensive and frequent cleaning is not carried out.
It is proven that Sentinel drastically reduces the amount of wet
and dry contamination carried into the building and lengthens
the period between cleaning - providing an aesthetic and economic
gain.

|
Specification
codes are only available to registered users online
|
For
help and guidance on selecting the correct type of sentinel
matting for your project please contact our Technical Help Desk
|
Tel
01257 273114
|
Fax
01257 262386
|
Email
technical@shackerley.co.uk
|
|
|
|