Shackerley Holdings Manufacturers of Entrance Matting and Barrier Matting

Matwell Frames & Suspended Reservoir Frames

Standard Frames Sentinel® Matwell Frame Kits are delivered with exact mitred corners which are screwed together with strong metal corner pieces. The frames are predrilled with counter sunk holes to allow simple screw fixing on-site. Special screed anchor clips are available to allow the assembled frame to be set insitu within a screed. For wet or exposed flooring areas, we recommend the use of our Type 24 stainless steel frame.
Suspended Reservoir Frames Sentinel ‘gap’ system matting can be installed in both conventional matwells and suspended reservoired matting systems. When installed within a conventional frame, the dirt will fall between the ribs and be contained inside the matwell, thus ensuring that subsequent visitors do not track the trapped dirt across the matting and into the building. When installed over a suspended matwell system, dirt will fall between the ribs and be collected inside the reservoir. The system is ideal for areas where unusually high levels of contamination are anticipated, such as coastal/beach front areas. To collect the dirt contained within the matwell, the matting is simply rolled up to allow cleaning.

Free standing matt with dam The Ramp type framework negates the need for any major preparation. The system allows location over any existing floor finish and causes no delay or disruption to the normal usage during installation.
Base of Matwell The base of the Matwell, usually screed, should be perfectly flat. Should there be any unevenness in the Matwell base, this must be levelled out prior to installation of the mat. We recommend self levelling compound for this purpose. Framing Material Type 20 Aluminium Type 22 Brass Type 24 Stainless Steel (304 grade)